Plumerai People Detection C API¶

StatusCode PeopleDetectionMicroInit(unsigned char* tensor_arena);

StatusCode PeopleDetectionMicroInitSplit(
    unsigned char* persistent_tensor_arena,
    unsigned char* non_persistent_tensor_arena);

StatusCode PeopleDetectionMicroCleanUp();

signed char* PeopleDetectionGetInputPointer();

void PeopleDetectionReadDataCallback(void (*user_callback)(void* input_ptr));

StatusCode PeopleDetectionMicroProcessFrame(BoxPrediction* results,
                                            int results_length,
                                            int* num_results_returned,
                                            float delta_t,
                                            const unsigned char* input_ptr);

typedef struct BoxPrediction {
  float y_min;       // top coordinate between 0 and 1 in height dimension
  float x_min;       // left coordinate between 0 and 1 in width dimension
  float y_max;       // bottom coordinate between 0 and 1 in height dimension
  float x_max;       // right coordinate between 0 and 1 in width dimension
  float confidence;  // between 0 and 1, higher means more confident
  unsigned int id;   // the tracked identifier of this box
  DetectionClass class_id;  // the class of the detected object
} BoxPrediction;

// Most functions in this API return a status-code to indicate whether
// everything went well. If not, see below for more information about the error
// code.
typedef enum StatusCode_ {
  Success = 0,             // Everything went all right
  AllocationError = -1,    // Memory allocation failure, check arena size
  InvokeError = -2,        // Unexpected error, contact Plumerai
  OutputDimsError = -3,    // Unexpected error, contact Plumerai
  RegistrationError = -4,  // Unexpected error, contact Plumerai
} StatusCode;

// Initializes the people detection algorithm. This needs to be called only
// once at the start of the application.
//
// @param tensor_arena A pointer to a user-allocated contiguous memory region
//  to store persistent, input, output, and intermediate tensors. The size
//  should be equal or larger than the value given by `TENSOR_ARENA_SIZE` in
//  `model_defines.h`. This memory region should not be overwritten after the
//  call to this function is made. See below for a version that splits the
//  tensor arena in persistent and non-persistent storage.
// @return a status-code indicating whether there was an error, it can be either
//  of `Success` or `AllocationError` (see above for a description).
StatusCode PeopleDetectionMicroInit(unsigned char* tensor_arena);

// Initializes the people detection algorithm. As above, but splits the tensor
// arena in two such that one buffer can be re-used as scratch space.
//
// @param persistent_tensor_arena A pointer to a user-allocated contiguous
//  memory region to store persistent data. The size should be equal or larger
//  than `TENSOR_ARENA_SIZE_PERSISTENT` from `model_defines.h`. This memory
//  region should not be overwritten after the call to this function is made.
// @param non_persistent_tensor_arena A pointer to a user-allocated contiguous
//  memory region to store input, output, and intermediate tensors. The size
//  should be equal or larger than `TENSOR_ARENA_SIZE_NON_PERSISTENT` from
//  `model_defines.h`. This memory region can be overwritten by the user between
//  (but not during) calls to `PeopleDetectionMicroProcessFrame`.
// @return a status-code indicating whether there was an error, it can be either
//  of `Success` or `AllocationError` (see above for a description).
StatusCode PeopleDetectionMicroInitSplit(
    unsigned char* persistent_tensor_arena,
    unsigned char* non_persistent_tensor_arena);

// Cleans-up the people detection algorithm. This needs to be called only once
// at the end of the application.
//
// @return a status-code indicating whether there was an error. At the moment
// always returns `Success`.
StatusCode PeopleDetectionMicroCleanUp();

// Retrieves the address of where the input data needs to be stored before
// making a call to `PeopleDetectionMicroProcessFrame`. The camera output
// should be stored here in the image format described before. Any data residing
// at this location can be overwritten by a call to
// `PeopleDetectionMicroProcessFrame`. The user should not write beyond
// `PLUMERAI_IMAGE_SIZE` bytes (see `model_defines.h`) from the start of this
// value.
// This function should not be used if `input_ptr` is used to specify the input
// data, see appendix A below.
//
// @return a pointer to the location the input data should be placed.
void* PeopleDetectionGetInputPointer();

// As an alternative of using `PeopleDetectionGetInputPointer` and setting the
// new input data in between calls to `PeopleDetectionMicroProcessFrame`, there
// is the option to provide a user-defined callback to retrieve input data (e.g.
// from a camera) in parallel to running people detection. To do so, provide a
// function pointer that takes as single argument a pointer to the input data
// (similar as what is returned by `PeopleDetectionGetInputPointer`) and returns
// nothing. In this function a user can start for an example an asynchronous DMA
// call to grab a new camera frame and place it in the input buffer. Waiting for
// execution of any such parallel operation needs to be done before making a
// next call to `PeopleDetectionMicroProcessFrame`.
//
// @param user_callback The callback function as described above. It will be
//  executed roughly halfway execution of each call to
//  `PeopleDetectionMicroProcessFrame` and takes the address of where the input
//  data needs to be stored. The user should not write beyond
//  `PLUMERAI_IMAGE_SIZE` bytes (see `model_defines.h`) from the start of this
//  value.
void PeopleDetectionReadDataCallback(void (*user_callback)(void* input_ptr));

// Process a single frame from a video sequence with RGB input. This will
// process RGB image data (1st byte red, 3rd blue) of size PLUMERAI_IMAGE_HEIGHT
// * PLUMERAI_IMAGE_WIDTH * BYTES_PER_PIXEL (see `model_defines.h`) in unsigned
// RGB888 or RGB565 format found at the location returned by
// `PeopleDetectionGetInputPointer` or set by `input_ptr`, see appendix A below.
//
// @param results A pointer to an array to store the resulting boxes in. The
//  user needs to allocate space for this structure. The recommended size is 20,
//  but if the user allocates less, then fewer boxes are returned. If fewer
//  boxes are detected, then also fewer are returned. This amount is given by
//  `num_results_returned`, see below.
// @param results_length The number of `BoxPrediction` elements allocated in
//  the provided `results` parameter above by the user. See that parameter for
//  more info.
// @param num_results_returned The minimum of the number of resulting
//  bounding-boxes found in the image and `results_length`. The results
//  structure `results` will be filled with zeros beyond this amount. If this
//  value is equal to `results_length`, it might be an indication that more
//  boxes are found than that can be output.
// @param delta_t The time in seconds it took between this and the previous
//  call to 'PeopleDetectionMicroProcessFrame' (1/fps). For best quality result,
//  this should be as accurate as possible and can be measured with a timer.
// @param input_ptr As alternative to `PeopleDetectionGetInputPointer`, this can
//  optionally be used to set the input data. In most situations, i.e. when
//  `PeopleDetectionGetInputPointer` is used, it needs to be set to `nullptr`
//  (C++) or `NULL` (C). See appendix A below for more information.
// @return a status-code indicating whether there was an error, it can be either
//  of `Success`, `InvokeError`, `OutputDimsError` (see above for description).
StatusCode PeopleDetectionMicroProcessFrame(BoxPrediction* results,
                                            int results_length,
                                            int* num_results_returned,
                                            float delta_t,
                                            const unsigned char* input_ptr);

// The total required tensor arena size, the sum of the two components below.
#define TENSOR_ARENA_SIZE 378448

// The required persistent tensor arena size. Anything in this section should
// not be overridden.
#define TENSOR_ARENA_SIZE_PERSISTENT 34304

// The required non-persistent tensor arena size. This can be freely accessed
// in between model invocations.
#define TENSOR_ARENA_SIZE_NON_PERSISTENT 344128

// The Plumerai People Detection algorithm requires a fixed input resolution.
// It uses the RGB888 data-format with 3 bytes per pixel.
#define PLUMERAI_IMAGE_WIDTH 320   // The width of the input image in pixels.
#define PLUMERAI_IMAGE_HEIGHT 240  // The height of the input image in pixels.
#define PLUMERAI_IMAGE_SIZE (PLUMERAI_IMAGE_WIDTH * PLUMERAI_IMAGE_HEIGHT * 3)

#include "plumerai/model_defines.h"
#include "plumerai/people_detection_micro.h"

// Here stdio.h is used for `printf`, but this can be replaced with any specific
// method of printing results to screen, if needed.
#include <cstdio>

// Example tensor arena. Can be allocated on a specific memory region if
// desired. It needs to be of size TENSOR_ARENA_SIZE.
__attribute__((aligned(16))) unsigned char tensor_arena[TENSOR_ARENA_SIZE];

void mainloop() {
  // This initializes the people detector
  int error_code = PeopleDetectionMicroInit(tensor_arena);
  if (error_code != 0) return;
  auto input_ptr =
      reinterpret_cast<unsigned char*>(PeopleDetectionGetInputPointer());

  // We pre-allocate memory for the results, at most 10 boxes can be found
  BoxPrediction predictions[10];

  // Loop over frames in a video stream. In this example we run only 10 times.
  for (int t = 0; t < 10; ++t) {
    // Some example input here, normally this is where image data is acquired.
    // We can pass the `input_ptr` value directly to our camera API.
    // In this example here we simply assign some values for fake input data.
    for (int i = 0; i < PLUMERAI_IMAGE_SIZE; ++i) {
      input_ptr[i] = static_cast<unsigned char>(i % 256);
    }

    // Compute the delta-t in seconds between the current call and the previous
    // call to 'PeopleDetectionMicroProcessFrame'. Here we just set it to some
    // fixed value.
    const auto delta_t_s = 0.5f;  // 2FPS

    // Process a single input image frame from e.g. a camera video stream. The
    // result will be stored in `predictions`, and `num_results` will tell us
    // how many results there are.
    int num_results = 0;
    error_code = PeopleDetectionMicroProcessFrame(predictions, 10, &num_results,
                                                  delta_t_s, nullptr);
    if (error_code != 0) return;

    // Write the results to a terminal. Replace this with your own printing
    // function if needed.
    printf("Detected %d people\n", num_results);
    for (int i = 0; i < num_results; ++i) {
      BoxPrediction p = predictions[i];
      printf(
          "Detected person with confidence %.2f @ (x,y) -> (%.2f,%.2f) till "
          "(%.2f,%.2f)\n",
          p.confidence, p.x_min, p.y_min, p.x_max, p.y_max);
    }
  }

  // Clean-up
  error_code = PeopleDetectionMicroCleanUp();
  if (error_code != 0) return;
}

void mainloop() {
  // This initializes the people detector
  int error_code = PeopleDetectionMicroInit(tensor_arena);
  if (error_code != 0) return;

  // This sets the read-data callback which can be used to read in camera data
  // in parallel to running inference, e.g. through a DMA. This callback will be
  // executed roughly halfway execution of 'PeopleDetectionMicroProcessFrame'.
  PeopleDetectionReadDataCallback(start_camera_capture);

  // We pre-allocate memory for the results, at most 10 boxes can be found
  BoxPrediction predictions[10];

  // Since the callback above is only executed during the first inference, we
  // need to acquire the first camera input manually before entering the loop.
  auto input_ptr =
      reinterpret_cast<unsigned char *>(PeopleDetectionGetInputPointer());
  start_camera_capture(input_ptr);

  // Loop over frames in a video stream. In this example we run only 10 times.
  for (int t = 0; t < 10; ++t) {
    // Before we start 'PeopleDetectionMicroProcessFrame' we want to make sure
    // the camera data is fully captured.
    finalize_camera_capture();

void start_camera_capture(void *input_ptr) {
  // Here we would normally ask the camera to start recording data and store it
  // into the 'input_ptr'. However, since this differs per camera, we leave this
  // unimplemented here. Ideally this function finishes almost instantly, but
  // leaves some parallel process working in the background (e.g. a DMA). We
  // should not write beyond 'PLUMERAI_IMAGE_SIZE' bytes from 'input_ptr'.
}

void finalize_camera_capture() {
  // If the 'start_camera_capture' function above started some parallel process
  // then it can be synchronized here to make sure the camera capture process
  // is completed. If it isn't completed yet, we can wait here in this function.
}